TRAVERSE SH 226

Suspension crossarm for single three phase bare conductor lines. The crossarm is used for straight lines, only a very small line angle is allowed. The conductors are attached to the crossarms by using suspension insulator strings (such as SH193.454 or equivalent). By additional accessories SOT93.21 and PPS345 and suitable suspension clamp, it is possible install shield wires above the main conductors. Allowed loads for the crossarm at conductor fixing points are: Fx=2.5 kN angle load, Fz=3.6 kN horizontally along conductor, Fy=7.5 kN vertically downwards.